# Problem Definition The problem is to simulate a Rotating Drum with **6** Baffles with the diameter **0.24m** and the length **0.1m** rotating at **15 rad/s**. This Rotating Drum is filled with **20000** Particles.The timestep for integration is **0.00001 s**. There are 2 types of Particles in this Rotating Drum: * **12500** Particles with **4 mm** diameter * **7500** Particles with **5mm** diameter

## Setting up the Case As it has been explained in the previous Cases, these Tutorials are based on text-based scripts. There are three parts in this case to study `caseSetup`, `setting` and `stl`. ## Particle Insertion In this case we have two region for inserting our particles. In the both region we define rate of Insertion, start and end time of Insertion, coordinates of Insertion and radius of Insertion. An example for the Right Layer Region of insertion of Particles is shown below. ```C++ // Right Layer Region layerrightregion { // type of insertion region type cylinderRegion; // insertion rate (particles/s) rate 12500; // Start time of LightParticles insertion (s) startTime 0; // End time of LightParticles insertion (s) endTime 1; // Time Interval of LightParticles insertion (s) interval 0.025; cylinderRegionInfo { // Coordinates of cylinderRegion (m,m,m) p2 (-0.15 0.25 0.05); p1 (-0.15 0.24 0.05); // radius of cylinder (m) radius 0.035; } } ``` Then in the `sphereShape` the diameter and the material of our Particles are defined. ```C++ // names of shapes names (lightSphere heavySphere); // diameter of shapes (m) diameters (0.004 0.005); // material names for shapes materials (lightMat heavyMat); ``` In this Case we have two types of Particle with 4mm and 5mm diameters. At the end of `caseSetup`, the interaction between the particles and the Shell of Rotating Drum is defined. You can see the Coefficients of the Interactions between the particles and shell of Rotating Drum in `interaction`. ## Settings ### Geometry In the Settings folder the Specifications of our Rotating Drum and the information of rotating axis are brought. In this case we use two solid cylinders to keep our rotating drum isolated. This is to prevent particles, from being thrown out. For example the codes for the rear cylinder is brought below. ```C++ /*This is a Cylinder Wall at the rear of cylinder */ CylinderRear1 { // type of the wall type cylinderWall; // first point for the axis of rotation p1 (-0.1974 0.2269 -0.001); // second point for the axis of rotation p2 (-0.1974 0.2269 0.0); // Radius of p1 radius1 0.0001; // Radius of p2 radius2 0.12; // material name of the wall material wallMat; // motion component name motion rotAxis; } ``` ### Rotating Axis Info In this part of `geometryDict` the information of `rotating axis` and `velocity` of this Rotating Drum is defined. Also in purpose to settle down Particles after they were inserted we use a `startTime` and `endTime` function. This shows the start time of rotation. ```C++ rotatingAxisMotionInfo { rotAxis { // first point for the axis of rotation p1 (-0.1974 0.2269 0); // second point for the axis of rotation p2 (-0.1974 0.2269 0.1); // rotation speed (rad/s) => 15 rpm omega 2.38733; // Start time of Geometry Rotating startTime 2; // End time of Geometry Rotating endTime 9.5; } } ``` ## Starting Simulation To start Simulation we have to create our Particles at first. Enter `>particlesPhasicFlow` command to create the initial fields for particles. Enter `>geometryPhasicFlow` command to create the Geometry. At last, enter `>sphereGranFlow` command to start the simulation. After finishing the simulation, you can use `>pFlowtoVTK` to convert the results into vtk format storred in ./VTK folder.